SynergyCP Deployment of Additional Dedicated Server Nodes

1. Rack and cable manage (duh)

2. Set static IP (iDrac) and document

3. document port number and NIC MAC for SynergyCP

4. Setup in SenergyCP

5. Set PERC to RAID (in iDRAC GUI)

6. Run "Convert to Non-RAID" on all drives

7. Check under Device Settings -> Integrated NIC -> NIC Configuration -> Legacy Boot Protocol is set to PXE

8. Boot mode via KVM to BIOS and NOT UEFI

9. Check OS Reload will work

10. Set HostHeader setting via iDRAC SSH

racadm set idrac.webserver.HostHeaderCheck 0